Cooling the spaces
where India works.
Duct air coolers, HVLS ceiling fans, portable and mobile coolers, exhaust fans and inline duct fans — 34 models built for factories, warehouses, farms and halls that need serious airflow on very little power.
- 1.5–3 kW
- Per cooler, single phase
- 100%
- Fresh, filtered air
- 1,200 m²
- Coverage per HVLS fan
- 24 hrs
- Quotation turnaround
The Ayzair range
6 product families. One engineering standard.
Every Ayzair product is built for continuous industrial duty — heavy-gauge materials, IP-rated motors and components specified for the Indian climate rather than a showroom.
Not sure what you need?
Most buildings do best with a layered system — cooled fresh air in, air movement across the floor, stale hot air out. Tell us the building and we will specify the combination.
Why Ayzair
Built for the way Indian industry actually runs.
Shutter doors open all day. Ceilings at nine metres. Dust, humidity, ammonia and 44 °C afternoons. We build for that building, not for a lab.
Designed and assembled in Pune
Our Chakan facility pairs manufacturing with an in-house R&D team, so the range keeps pace with what our customers actually ask for.
Running cost is the design brief
Every product in the range is chosen on watts per cubic metre of air moved. That is the number that decides whether a cooling project survives its second summer.
Serviceable by your maintenance team
Fewer moving parts, standard components, accessible panels. No proprietary tooling and no waiting on a specialist for routine work.
Answered within one working day
Every technical enquiry gets a response from an engineer inside 24 hours — sizing, drawings, bulk pricing or a straight recommendation not to buy.
On site
Four-unit bank · 88,000 CMH combined · roughly 8 kW
How it works
The science of evaporative cooling.
Hot, dry outside air is drawn through a water-saturated honeycomb pad. As the water evaporates it absorbs heat from the airstream, so cooler, filtered, 100% fresh air reaches your workspace — with no compressor and no refrigerant.
- 1
Fresh air intake
Louvred side panels draw hot outside air into the cooler cabinet from all four sides.
- 2
Honeycomb saturation
A circulating pump wets the 7090/5090 cooling pad continuously, keeping the entire surface saturated.
- 3
Evaporative heat exchange
As dry air passes through the wet pad, water evaporates and absorbs sensible heat from the airstream.
- 4
Powered discharge
A heavy-duty axial fan pushes the cooled, filtered air through ducting into the target zone — up to 20 m away.
100%
Fresh air, no recirculation
20 m
Ducted throw distance
1.5–3 kW
Connected load per unit
Industries we serve
Specified everywhere air decides output.
From poultry sheds where two degrees changes yield, to banquet halls where guests remember only the heat.
At a glance
The numbers behind the range.
68,000m³/h
Peak exhaust airflow — Ayzair-1750
30,000CMH
Peak cooler airflow — AYZAIR-30
14,900m³/min
Peak HVLS air volume — Ayzair-24
≤40dB(A)
HVLS sound level, all sizes
34
Models across 6 families
80–95%
Evaporative pad efficiency
IP55
Motor protection, cooler & HVLS
20m
Maximum single-unit duct run
Insights
Sizing guides and honest comparisons.
Written by the same engineers who size your building — no marketing gloss, no numbers we cannot defend.
Answers
Frequently asked questions
Cannot find what you need? Call +91 80871 10156 or WhatsApp us — an engineer, not a call centre, picks up.
Ask on WhatsAppWhat does Ayzair manufacture?
Ayzair Private Limited manufactures six families of industrial air movement equipment in Pune: ductable evaporative air coolers (18,000–30,000 CMH), HVLS ceiling fans (8 ft to 24 ft), the Model 1500 mobile industrial fan, the TENT-150 portable outdoor cooler, Hammer exhaust fans (200 mm to 1750 mm) and Inline-Jet mixed-flow duct fans (Ø100 to Ø315 mm) — 34 models in all.
Where is Ayzair located and do you supply across India?
Our office is in Bhosari I.E., Pune and our factory is at Chakan, Pune, Maharashtra. We supply pan-India with installation support and after-sales service for industrial customers.
How much power does Ayzair equipment draw?
Very little. A 22,000 CMH ductable cooler runs on about 2 kW, a 24 ft HVLS fan on 1.5 kW and the Model 1500 mobile fan on just 370 W — all single or three phase on standard supply. Because the connected load is low, most customers add units without upgrading their sanctioned load, and a full installation keeps running on generator backup.
Do you help size the system for my building?
Yes, at no cost. Share your floor area in sq ft, roof height and a short description of the activity inside, and our engineering team will size the number, model and configuration of units and return a no-obligation quotation within one working day.
What certifications do Ayzair products carry?
The HVLS AS Series carries CE, IEC, LVD and EMC certification with IP55 protection and IE3+ efficiency. Evaporative coolers use IP55 continuously-rated motors, and every Hammer exhaust fan is factory tested for vibration, airflow and electrical safety before despatch.
Can I get a product catalogue?
Yes. Request a catalogue through the contact form or WhatsApp us on +91 80871 10156 and we will send the PDF for the range you are interested in.
Next step
Let us size the right system for your building.
Share your floor area, roof height and what happens inside. A member of our engineering team will return a no-obligation quotation within 24 hours.